The VIA Vectro VT6212L is a 4-port PCI Host Controller, offering enhanced performance and simultaneous connectivity to multiple devices. Certified by the USB Implementers Forum for Hi-Speed USB 2.0 operation, the VIA Vectro VT6212L ensures seamless plug-and-play connectivity to new generation USB 2.0-enabled peripheral devices. Benefits of the VIA Vectro VT6212L Multi-functionality: The four.
The new Intel Android* USB Driver package 1. 10.0 that supports Windows* 10 is available for download at the Intel Developer Zone. It enables you to connect your Windows*-based machine to your Android* device that contains an Intel® Atom™ processor inside. This includes the latest Intel® Atom™ x3 and x5 processor families (SoFIA devices are not supported in this version) and supported host systems with Windows* 10 (32/64-bit) and Android devices including those with Android* 5.x – Lollipop.
USB drivers for Android devices are platform-specific, and there is no guarantee that this Intel USB driver will work for every OEM device. Since most OEMs develop the USB driver for all devices that they sell, we recommend that you also check out the Android* OEM USB driver page that lists the OEM drivers.
- Systemprofiler SPUSBDataType # USB: USB 3.0 Bus: Host Controller Driver: AppleUSBXHCISPTLP PCI Device ID: 0x9d2f PCI Revision ID: 0x0021 PCI Vendor ID: 0x8086 Generic USB Joystick: Product ID: 0x0006 Vendor ID: 0x0079 Version: 1.07 Speed: Up to 1.5 Mb/sec Manufacturer: DragonRise Inc. Location ID: 0x14400000 / 2 Current Available (mA): 500.
- Method 2: Update MTP USB Device Drivers Via Device Manager. Here comes the Device Manager to give you a hand in keeping your MTP USB device driver updated. This feature of Windows will help find the drivers and install the latest version of their updates on your computer. So, if your MTP USB device needs a checkup, this is where you can stop.
This installation instructions document will guide you through installing the Intel® Android* USB Driver package which will enable you to connect your Windows* based machine to your Android device that contains an Intel® Atom™ processor inside.
Supported USB profiles
After installing the USB driver package, plug in your Android* device to your computer using your micro-USB to USB cable. The following are the supported USB profiles via the Intel Android USB Driver package:
- ADB (Android Debug Bridge): This is the debug interface of Android. It is mandatory to use in order to re-flash, and debug.
- MTP (Media Transfer Protocol): This is the Windows* protocol to facilitate the transfer of media files.
- PTP (Picture Transfer Protocol): This is the Windows* protocol to allow the transfer of images from digital cameras to computers.
- RNDIS: This provides a virtual Ethernet link using phone network.
- CDC Serial (Modem AT Proxy): This provides the link to Modem to allow to use AT commands through a virtual com port.
Troubleshooting Errors
Device is not recognized at all
These drivers are only for Intel® devices. If you’re using a device from one of our OEM, please get the drivers directly from their web site, or you can use this list of drivers on the Android* site.
Errors in the Windows* Device Manager
VIA USB Devices Driver
Open Windows Device Manager:
- If USB Mass Storage is visible instead of ADB Device, then right click on the Mass Storage device icon and select ‘Uninstall’.
Then unplug your device from the computer and install drivers’ setup again. - If Android Device is visible with a yellow warning icon, then right click on the Android Device icon and select ‘Uninstall’.
Then unplug your device from the computer and install drivers’ setup again.
Portable Device that has no 'USB debugging' option
There may not be an enabled “USB Debugging” option. The developer options on a phone are hidden by default. Open the settings on a phone, and find the About section. Look through it until the 'Build number' entry is visible. Tap if five times in quick succession, and there should be a small dialog stating it’s now set to developer. Come back to Settings main menu and go into Developer Options, then enable USB Debugging.
Windows XP: When I activate MTP there is no pop-up to allow me to access phone file system or transfer media files.
MTP is not supported by default with Windows XP. You have to install Windows Media Player 10 or later.
-->Note
External microphones cannot be used. HoloLens 2 uses its built-in microphone array.
Pair Bluetooth devices
HoloLens 2 supports the following classes of Bluetooth devices:
- Mouse
- Keyboard
- Bluetooth audio output (A2DP) devices
HoloLens (1st gen) supports the following classes of Bluetooth devices:
- Mouse
- Keyboard
- HoloLens (1st gen) clicker
Note
Other types of Bluetooth devices, such as speakers, headsets, smartphones, and game pads, may be listed as available in HoloLens settings. However, these devices aren't supported on HoloLens (1st gen). For more information, see HoloLens Settings lists devices as available, but the devices don't work.
Pair a Bluetooth keyboard or mouse
Via Usb Devices Driver Vga
Turn on your keyboard or mouse, and make it discoverable. To learn how to make the device discoverable, look for information on the device (or its documentation) or visit the manufacturer's website.
Use the bloom gesture (HoloLens (1st gen)) or the start gesture (HoloLens 2) to go to Start, and then select Settings.
Select Devices, and make sure that Bluetooth is on.
When you see the device name, select Pair, and then follow the instructions.
HoloLens (1st gen): Pair the clicker
Use the bloom gesture to go to Start, and then select Settings.
Select Devices, and make sure that Bluetooth is on.
Use the tip of a pen to press and hold the clicker pairing button until the clicker status light blinks white. Make sure to hold down the button until the light starts blinking.
The pairing button is on the underside of the clicker, next to the finger loop.
On the pairing screen, select Clicker > Pair.
Disable Bluetooth
This procedure turns off the RF components of the Bluetooth radio and disables all Bluetooth functionality on Microsoft HoloLens.
Use the bloom gesture (HoloLens (1st gen)) or the start gesture (HoloLens 2) to go to Start, and then select Settings > Devices.
Move the slider switch for Bluetooth to the Off position.
HoloLens 2: Connect USB-C devices
HoloLens 2 supports the following classes of USB-C devices:
- Mass storage devices (such as thumb drives)
- Ethernet adapters (including ethernet plus charging)
- USB-C-to-3.5mm digital audio adapters
- USB-C digital audio headsets (including headset adapters plus charging)
- Wired mouse
- Wired keyboard
- Combination PD hubs (USB A plus PD charging)
Note
Some mobile devices with USB-C connections present themselves to the HoloLens as ethernet adaptors, and therefore could be used in a tethering configuration, starting with Windows Holographic, version 2004. USB LTE modems that require a separate driver, and/or application installed for configuration are not supported.
In response to customer feedback, we have enabled limited support for cellular connectivity tethered directly to the HoloLens via USB-C. Tethered connectivity only works for devices that support the generic Microsoft RNDIS driver implementation and that don’t require any additional drivers or application installs. Such device, when connected, will automatically appear as a new Ethernet connection in the HoloLens 2 Network Settings UI. Please consult your device’s manufacturer for further details on whether it supports the generic Microsoft RNDIS driver.
Via Usb Devices Driver Wireless
USB-C Hubs
Some users may need to connect multiple devices at once. For users who would like to preview an Insider feature and use a USB-C microphone along with another connected device, USB-C hubs may fit the customer's need. Microsoft has not tested these devices, nor can we recommend any specific brands.
Requirements for USB-C hub and connected devices:
- Connected devices must not require a driver to be installed.
- The total power draw of all connected devices must be below 4.5 Watts.
Connect to Miracast
To use Miracast, follow these steps:
Do one of the following:
- Open the Start menu, and select the display icon.
- Say 'Connect' while you gaze at the Start menu.
On the list of devices that appears, select an available device.
Complete the pairing to begin projecting.